#Autodesk fusion 360 free with aut software
#Autodesk fusion 360 free with aut download

You will now see the Langmuir Systems FireControl post processor every time you highlight Local.In the Import submenu, select your Downloads folder (or other permanent location) on the left-hand side of the window,Д¬lick to highlight the post processor file, and click Open in the bottom right-hand corner of the window.With Local highlighted, select the Import option near the top of the window.In the Post Library submenu, click Local on the left-hand side and make sure that it is highlighted.

To the text field for Post in the Machine and post subheading.

Go back to Fusion 360 and click the square icon with 3 dots next.

Take note of the location of this file in your computer's Downloads folder or after moving this file to another permanent location.ДЇollow the instructions provided by Autodesk for installing Personal Posts for Fusion 360. Once the file downloads to your computer,

#Autodesk fusion 360 free with aut download

You will need to open an internet browser and download the вЂLangmuir Systems Fusion 360 for FireControl Post ProcessorвЂ™ДЇile from the Downloads page on our website. If this is your first time posting a program for FireControl in Fusion 360,.To do this, click on the Post Processor icon (below) in the Additive menu bar. Telling the machine where, how, and when to move in order to cut out the part.

#Autodesk fusion 360 free with aut software

A G-Code file is a set of text instructions that areДЇed to the CrossFire CNC electronics box through FireControl software for

Next, we are going to generate a G-Code file for this tool path using the Post.

By this point, you should already have a valid toolpath created in Fusion 360ДЇor your part similar to what is shown below.

Need to be left to the Fusion360 defaults to properly set heights in your G-code program.Д«e sure to have these values set to the below. However, Clearance Height, Retract Height, and Top Height

Actual Pierce and Cut Height Values will be set in the Post Processing step below.

In the Linking menu of your CAM settings. Go back and make sure that the box for вЂ Keep Nozzle DownвЂ™ is left unchecked

If your CrossFire machine is equipped with a powered Z-axis, you will want to.